Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 17.06.2025 00:10

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This device then solves the entire problem.

The bolt then partially travels down the line to your home.

There are two important concepts here.

Who are some of the best Korean Actresses?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The MOV will conduct when the voltage exceeds 50% of line voltage.

How do you handle family members who ask for handouts?

The other is “what does a “fuse” do?”

This is where this question deviates from being a 'generic' question, and becomes more specific.

An AC voltage/ current source, and an ac inductive load.

Why was the rock band Kiss so successful?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The third is lightning and “how it gets conducted into a home.”

This is 'the assistant's answer'

What can I do when I'm ugly on both outside and inside? What do I do? Cut myself off from the world to make everyones lives better? I'm a monster. I hurt feelings, and I say what was said to me. I feel like I'm nothing but a burden. What do I do?

One is “what exactly is in a ‘surge protector’ ? ”

nine

A fuse is a non-resetable over current circuit protector.

What habits do happy couples have?

He then describes Rainy Season and Lightning.

[old diagram got deleted by accident]

but this device (an Inductor) … impedes the rapid changes in the current.

Shakira Says Being an Immigrant in the U.S. Amid Trump’s Policies “Means Living in Constant Fear” - The Hollywood Reporter

I post the exact comment here.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Why do I like to eat my own cum?

One

2024–10–16 [ OO OLAOYE OYEBODE ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

What are some signs he is deeply in love with you?

At one ohm, the resistor has a maximum of 1 watt power.

For this case there are devices called Metal oxide varistors (MOV).

a photo is worth a thousand words.

Researchers raise red flag that doctors may be underprepared for devastating new disease emerging in US: 'We want to give the early warning' - Yahoo

A circuit breaker is similar, but is resettable.

Barnstars:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

What kind of lights would you like to use for your home decor?

First Sentence:

But it can get overloaded, and no longer works.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

My husband asked me why do I keep on complaining about him cheating. Why don't I just leave?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

(Dc diagram shown, AC is similar).

[image of Common-mode choke]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Now when you have a certain ac resistance, then a current flows in a loop.

It also is a device that limits the change in current flow.

These are simplified answers to the original question, and does not change anything I wrote above.

Here is a simplified AC power diagram.

This one hit behind the barn.

What is lightning?

He then describes the function of a fuse.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then asserts :

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

In schematic diagrams this is the symbol for a fuse:

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

2024–10–10[John johnson John Johnson ]

eight

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

At least they know the answer if they wanted it.

but I think this circuit , shows a few more pieces.

Because the load is inductive, the current lags the voltage.(by a bit).

Edit 2024–10.

So, the voltage could go up to 500 volts, and the fuse will not open up.

the problem then depends on "how fast does the fuse operate?".

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

It seems Mohan does not understand the difference between a comment and an Answer.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is where the MOV conducts again, and dissipated the energy.

These devices are installed between the “hot” and “neutral” and protective ground.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What does a fuse do?

There are three different concepts here that are getting confused.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Upvotes:

But… the neutral is now “floating” because of the 1 ohm resistance.

what exactly is a ‘surge’ protector?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

so, what happens?